You have 0 items in your cart.
Process Analyzers
Sub Categories
Category:
Vapor Pressure Analyzer
Designed for oil refinery Measures vapor pressure of petroleum products like gasoline Vapor pressure is measured by measuring static pressure of the sample that is jetting out from the nozzle at the constant temperature Measurement result attained via Reid method for vapor pressure Meas. range 0.01 - 1 MPa abs 0 - 0.15 MPa abs
Category:
Turbidity Analyzer
Suitable for water purification process (including river water, etc.) Surface scattering light method employed; 1 range/2 ranges/3 ranges available Reduces flow volume of sample water to 1/2 of existing models RS-485 equipped as standard specification; compatible with Modbus communication system Freely mountable on walls, racks, etc. for the compact lightweight design Meas. range 0 - 2 to 0 - 2000 (1 - 3 ranges) (mg/L, ppm, FTU, NTU)
Category:
Turbidity Analyzer
High Sensitivity Turbidity Analyzer TUH-1600 Highly-sensitive turbidity analyzer suitable for water purification process Surface scattering light method employed; 1 range/2 ranges/3 ranges available RS-485 equipped as standard specification; compatible with Modbus communication system Freely mountable on walls, racks, etc. for the compact lightweight design Meas. range 0 - 0.2 to 0 - 2.0 (1 - 3 ranges) (NTU)
Category:
Turbidity Analyzer
Turbidity Meter with Integrating Sphere TUI-100 Integrating sphere system employed for lab turbidity measurements Continuous measurement of turbidity in tap water, river water, industrial water, etc. Accurate results for minimized influence of color Meas. range 0 - 0.5/5 to 0 - 100/1000 Cell length: 50mm or 10mm (selectable) (mg/L, ppm, FTU, NTU)
Category:
Turbidity Analyzer
Colorimeter/Turbidity Meter COL-110 Color and turbidity can be measured simultaneously by dual wavelength with just one meter Equipped with interactive easy-to-use colortouch panel Meas. range Color: 0 - 10/20/30 (degrees C, DEG) Turbidity: 0 - 2/4/5/10 (degrees C, mg/L, ppm)
Industrial pH Transmitter HDM-135A（2-wire）/HDM-136A（4-wire） Easy-to-use pH analyzer for field installation in a compact and rigid aluminum enclosure Easier calibration done with standard solution Auto determination of electrode deterioration Alterable output range Automated self-diagnosis of fault (burn-out output) Meas. range -1 - 14
Industrial ORP Transmitter HDM-137A（2-wire）/HDM-138A（4-wire） Easy-to-use ORP analyzer for field installation in a compact and rigid aluminum enclosure Automatic check done with standard solution Auto-detection of electrode deterioration Alterable output range Automated self-diagnosis of fault (burn-out output) Meas. range -2000 - +2000mV
pH / ORP Transmitter with HART Interface HBM-165H（2-wire） HART communication protocol interface with a 2-wire, 24 VDC circuit Available for both pH and ORP measurements Diecast aluminum enclosure, digital display and a wide range of other useful features One-touch auto calibration Self-diagnostic function Meas. range -1.00 - 15.00 ORP -2000 - 2000 mV