Fluke

  • Filter

Backlit dual display of humidity and temperature Measures dew point and wet bulb temperatures 99 record storage capacity Ergonomic design with belt clip and protective holster Quick-response capacitance sensor with twist-open protective cover Compact and lightweight (188 g/6.6 oz) Temperature range from -20 °C to 60 °C (-4°F to 140 °F) Relative humidity from 5 % to 95 % Min/Max/Avg Data hold Low battery indicator

Displays 5 different test results Low voltage protection for both the main body and detachable toner unit Dual audible indicators Bi-gender adaptable toner section Removable push-on connector Removable Speed 81 connector Lightweight, durable anodized aluminum Auto shut off Replaceable parts Uses one AAA battery One-year warranty

Includes adjustable padded space with a moveable Velcro divider for protection of two test tools, such as a digital multimeter and a current probe. Durable polyester 600D case construction for long life. Compatible with Fluke 20, 70, 11X, 87V, 170 Series digital multimeters and other similar format test tools. One-year warranty.

6.5 digit resolution Basic V dc accuracy of up to 0.0035 % Dual display 100 μA to 10 A current range, with up to 100 pA resolution Wide ohms range from 10 Ω to 1 GΩ with up to 10 μΩ resolution 2 x 4 ohms 4-wire measurement technique Measures frequency and period Fluke 45 and Agilent 34401A emulation Graphical display Trendplot paperless recorder mode, statistics, histogram CAT I 1000 V, CAT II 600 V For the 24 ppm Model See Fluke 8846A

Industry standard Incredibly durable with lifetime warranty Accepts standard industry blades Lightweight and easy to use Adjustable spring impact mechanism allows low impact for 24 and 26 gauge wire or high impact for 22 gauge wire Convenient blade storage built into the end of the handle Easy blade insertion (locks in place)

Category: Connectors

Shielded four conductor cable terminated with a 9-socket D-subminiature connector and a 9-pin D-subminiature connector. Provides interconnection and pin translation between a Fluke 743 Documenting Process Calibrator and a Hewlett Packard HBSW-8200 Bar Code Wand. Overall length approximately 15 cm One year warranty

Category: Calibrators

Large display and simple, quick-click interface for easy one-handed operation Simultaneous mA and % readout for quick, easy, interpretation of readings mA accuracy of 0.015%, superior to other loop calibrators in this price range 1µA resolution for mA source, simulate and measure Push button 25% steps for fast, easy linearity checks 0-100% "span check" for fast confirmation of zeroand span Measures V dc to 28 V Selectable slow ramp, fast ramp, and step ramp to provide smooth outputs for valve slewing and loop functional tests 24 volt internal loop supply, so you can power and read a transmitter at the same time without carrying a DMM Single 9 V battery that is easily changed 0-20 mA or 4-20 mA default start up modes Innovative output adjustment dial with 1 µAand 100 µA resolution HART™ mode connects 250 W resistor in serieswith 24 V loop for compatibility with HART communicators. Also available Fluke 707EX Intrinsically safe model

Current Range: 1 to 600 A DC or AC Peak Basic Accuracy (DC to 400 Hz): +/- (2% of reading + 1 A) Output Signal: 100 A range: 10 mV/A | 600 A range: 1 mV/A Frequency Range: 40 Hz to 400 Hz Working Voltage: 600 V AC rms Maximum Conductor Diameter: 34 mm (1.34 inch) Safety Rating: IEC 1010 and CSA-C22.2 No. 1010-1 Installation Category II, Working Voltage 600V