You have 0 items in your cart.
Measure Water with Instruments
BAN910A-900PUKV2 PORTABLE MULTI-PARAMETER METER PH/ORP/COND/TDS/SALI/DO/RESIST/IONS-SENSORS FROM UK
Category: Water
High-performance water quality meter
■ pH Range: -2.000~20.000pH (±0.002pH)
■ mV Range: -1999.9~1999.9mV (±0.2mV)
■ Ion Concentration Range: 0.01~19999ppm, mg/L, mol/L
■ Conductivity Range: 0.00~20.00mS/cm (Max.200mS,±0.5%F.S)
■ TDS Range: 0~10ppt (Max. 20ppt, ±1% F.S)
■ Salinity Range: 0~10ppt (Max. 80ppt, ±1% F.S)
■ Resistivity: 0~100MΩ (±1% F.S)
■ Dissolved Oxygen Range: 0.00~20.00mg/L (±0.2mg/L)
■ % Saturation of Oxygen: 0~200% (±10%)
■ Temperature Range: 0~105 oC (±0.5 oC)
■ Up to 5 points push-button calibration, Auto-buffer recognition,
Automatically freezes stable measured values, Automatic
Temperature Compensation, Selectable pH buffer standards (USA,
NIST and DIN), ORP measurement modes, Temperature units (oC
or oF), Solutions (0.001/0.01/0.1), Cell constant, Temperature
coefficient, TDS factor, Normalization temperature (20 or 25 oC),
Practical salinity (PSU) or Seawater measurement standard, Pure
water or linear compensation mode and Stability conditions,
Manual salinity and barometric pressure compensation, Automatic
calibration due reminder, Real-time help message, Reset function,
Memory stores up to 500 readings, USB communication interface
| Specifications: | ||||
| Model | - | |||
| pH Range | -2.000~20.000pH | |||
| pH Accuracy | ±0.002pH | |||
| Resolution | 0.001, 0.01, 0.1pH, Selectable | |||
| Calibration Points | Up to 5 points | |||
| Calibration Solutions | USA(pH1.68/4.01/7.00/10.01/12.45), NIST(pH1.68/4.01/6.86/9.18/12.45), DIN(pH1.09/4.65/6.79/9.23/12.75) | |||
| Ion Concentration Range | 0.001~19999ppm, mg/L, mol/L (Depending on measuring range of Ion Selective Electrode) | |||
| Ion Concentration Accuracy | ±0.5% Full Scale (Monovalent), ±1% Full Scale (Divalent) | |||
| Calibration Points | 2 to 5 points | |||
| Calibration Solutions | 0.001, 0.01, 0.1, 1, 10, 100, 1000, 10000ppm, mol/L, mg/L | |||
| mV Range | -1999.9~1999.9mV | |||
| mV Accuracy | ±0.2mV | |||
| Resolution | 0.1, 1mV, Selectable | |||
| Conductivity Range | 0~20mS/cm (Max.200mS/cm) | |||
| Conductivity Accuracy | ±0.5% Full Scale | |||
| Calibration Points | Up to 5 points | |||
| Calibration Solutions | 10uS/cm, 84uS/cm, 1413uS/cm, 12.88mS/cm, 111.8mS/cm | |||
| TDS Range | 0~10ppt (Max. 20ppt, Depending on factor setting) | |||
| TDS Accuracy | ±1% Full Scale | |||
| TDS Factor | 0.1~1.0 (Default 0.5) | |||
| Salinity Range | 0~10ppt (Max.80ppt) | |||
| Salinity Accuracy | ±1% Full Scale | |||
| Salinity Measurement Modes | Practical Salinity (PSU) or Seawater Measurement Standard (ppt) | |||
| Resistivity Range | 0~100MΩ | |||
| Resistivity Accuracy | ±1% Full Scale | |||
| Resolution | 0.001, 0.01, 0.1, 1, Automatic | |||
| Temperature Coefficient | 0.0~10.0% per °C | |||
| Compensation Modes | Linear or Pure Water | |||
| Cell Constant | K=0.1, 1, 10, Selectable | |||
| Normalization Temperature | 20°C or 25°C | |||
| Dissolved Oxygen Range | 0.00~20.00mg/L or ppm | |||
| Resolution | 0.01, 0.1mg/L, Selectable | |||
| Dissolved Oxygen Accuracy | ±0.2mg/L (Calibration and measurement under the conditions of same temperature) | |||
| % Saturation of Oxygen | 0.0~200.0% | |||
| Accuracy | ±2.0% | |||
| Salinity Correction | 0~50g/L | |||
| Pressure Correction | 60.0~112.5kPa, 450~850mmHg | |||
| Temperature Range | 0~105°C, 32~221°F | |||
| Temperature Accuracy | ±0.5°C, ±0.9°F | |||
| Temperature Calibration | Manual | |||
| Temperature Compensation | 0~100°C, 32~212°F, Automatic or Manual; DO Mode: 0~50°C, 32~122°F, Automatic | |||
| Auto-Off | Manual or Automatic (10, 20, 30 minutes after last key pressed, Selectable) | |||
| Hold Function | Manual or Automatic | |||
| Stability Conditions | Low or High, Selectable | |||
| Calibration due reminder | 0 to 30 days | |||
| Reset Function | Yes | |||
| Memory | 500 data sets with Date/Time stamping | |||
| Output | USB Communication Interface | |||
| Connector | BNC and 6-pin connector | |||
| Power Requirements | 3×1.5V "AA" Batteries | |||
| Battery Life | Approximately 150 hours | |||
| Dimensions | 170(L)×85(W)×30(H)mm | |||
| Weight | 300 grams | |||
| Order Code and Accessories: | ||||
| Order Code | Accessories | |||
|
UK |
|
|||
|
CN |
|
|||
|
|
||||
